PU single-sided tooth synchronous belt is made of imported thermoplastic polyurethane material, with high wear resistance, various types of steel wire core to ensure that it still maintains good movement in the transmission, and small production tolerances. During the production process, a layer of nylon is applied to the tooth surface and/or back to ensure the operation characteristics of the special application-en, and a layer of polyurethane can be added to the back of the belt to prevent corrosion or high load. White polyurethane belt steel wire single-sided tooth synchronous belt can be made without interface length between 2 meters to 25 meters, less than 0.5 meters in length without interface polyurethane single-sided tooth synchronous belt mold table below, if there is no mold can be made 450 mm - unlimited length of the connection belt.

PU ring single-sided gear belt is driven by the matching of the belt teeth and the belt gear, so it has the comprehensive characteristics of gear drive, chain drive and belt drive to ensure the synchronous operation of the transmission wheel without slip, and the constant transmission speed ratio can reach 1: 10, the transmission speed can reach 40M/S, the transmission power can be from a few watts to a few kilowatts, the transmission structure is simple and light, and there is no need for lubrication, there is no need for large initial tension, the shaft load is small and easy to maintain, easy to replace, etc.

Polyurethane seamless single-sided synchronous belts are produced by a special molding process.

High quality polyurethane material makes the belt wear resistance and tear resistance. The steel wire core increases the strength and tensile strength of the belt, so that the belt has good dimensional stability. Polyurethane seamless single side tooth synchronization belt tolerance is small, can ensure the accuracy of thickness and length.

Mechanical properties

1, dimensional stability; 2, low pretension; 3, low noise; 4, high wear resistance; 5, no maintenance; 6, good flexibility; 7, linear speed up to 80 m/s

Chemical properties

1, anti-aging, waterproof solution, anti-ultraviolet UVA, anti-ozone; 2, working temperature: -30℃~+80℃ can withstand the maximum +110℃ for a short time; 3, anti-acid, alkali corrosion polyurethane seamless single-sided tooth synchronous belt is most suitable for low load synchronous graded transmission, such as office automation systems and household appliances.

Trapezoidal polyurethane single-sided tooth synchronization belt is divided into: MXL, XL, L, H, XH

Special tooth type polyurethane single-sided tooth synchronization belt: T2.5, T5, T10, T20, AT5, AT10, AT20

Full arc tooth polyurethane single-sided tooth synchronization belt: HTD3M, HTD5M, HTD8M,

Semi-arc tooth polyurethane single-sided tooth synchronization belt: S2M, S3M, S5M, S8M,

Modified circular arc tooth polyurethane single-sided tooth synchronization belt: RPP5M, RPP8M, RPP14M