XL rubber single tooth synchronous belt

Introduction to XL rubber single tooth synchronous belt

XL rubber single tooth synchronous belt design parameters:
The shape of the teeth is British trapezoid teeth, also known as square teeth, which belongs to the ultra-lightweight transmission design.
Standard design reference value: Pitch :5.080mm; Tooth height: 1.27mm; Belt thickness: 2.30mm; Angle: 50 degrees
XL rubber single-sided tooth synchronous belt design features:
XL rubber single-sided tooth synchronous belt adopts imported high-quality glass fiber cord and moulded incision, reducing the maintenance of the synchronous belt and extending the service life of the belt, but also increasing stability and flexibility. The variable slotted upper band underside pattern increases flexibility, reduces noise, and allows tighter bending of the diameter of smaller compact, heavy-duty engines to find pulley radii. The molding notch also contains air and heat dissipation, allowing the belt to increase code cooling, which reduces wear and deterioration caused by higher temperatures.
XL rubber single-sided synchronous belt Advantages:
1, XL rubber single-sided tooth synchronous belt using imported high-quality synthetic neoprene rubber as the main raw material, has good scalability, so that the synchronous belt more flexibility, but also to the pulley lateral stability.
2, heat active tensile glass fiber cord performance provides free from correct installation and tension.
3, accurate and the top width of the side wall is appropriate to match, and the belt wheel is smoother and more controlled by the belt size.
XL rubber single-sided synchronous belt Identification:
Three parts: Indicates the length, spacing, and width of the belt brought back by the part number. As shown in the following picture. This XL rubber single-sided toothed synchronous belt model has a 20 inch (508.00mm) pitch length and a 0.37 inch (9.4mm) bandwidth.

Specifications of XL rubber single tooth synchronous belt