T20 rubber single tooth synchronous belt

Introduction to T20 rubber single tooth synchronous belt

The T20 rubber single-sided synchronous teeth come with a 20mm trapezoidal pitch. They are used in large heavy duty drives. T20 rubber single-sided tooth synchronous belt adopts imported glass fiber cord, which can provide no correct installation and tension, reduce the maintenance of the belt and extend the service life of the belt, but also increase the stability and flexibility.
T20 rubber single-sided synchronous belt tooth spacing:
25 mm, 32 mm, 50 mm, 75 mm, 100 mm
The width of the T20 rubber single-sided synchronization belt can be determined according to customer requirements.
T20 rubber single-sided synchronous belt design features and advantages:
The T20 rubber single-sided tooth synchronous belt is flexibly connected to the motor and motor and has the following function points during operation:
1, T20 rubber single-sided tooth synchronous belt stable operation, avoid vibration belt slip.
2, T20 rubber single-sided tooth synchronization with high mechanical efficiency: effectively reduce friction and temperature, thereby increasing the use of the belt time.
3, T20 rubber single-sided synchronous belt load capacity is strong
4, T20 rubber single-sided tooth synchronization belt without noise interference and does not require maintenance
5, T20 rubber single-sided tooth synchronous belt resistance to ozone and UV.
6, T20 rubber single-sided tooth synchronous belt has good oil resistance prediction, grease and gasoline.
7, T20 rubber single-sided tooth synchronous belt according to special conditions, acid resistance and cleaning supplies.
T20 rubber single-sided synchronous belt Identification:
Three parts: Indicates the length, spacing, and width of the belt brought back by the part number. As shown in the following picture. This T20 rubber single-toothed synchronous belt model has a length of 2200mm and a bandwidth of 75mm.

Specifications of T20 rubber single tooth synchronous belt