T2.5 rubber single-sided synchronous belt design parameters:
The tooth shape is the metric trapezoid tooth, also known as the special square tooth, which belongs to the lightest transmission design.
Standard design reference value: Pitch :2.5mm; Tooth height: 0.7mm; Belt thickness: 1.3mm; Angle: 40 degrees
T2.5 rubber single-sided synchronous belt General specifications:
(1)T2.5 rubber single-sided tooth synchronous belt raw materials: glass fiber reinforced polyester material, neoprene rubber, nylon high tensile cloth
(2)T2.5 rubber single-sided synchronous belt load capacity: 36n/mm(205.6lbf/in)
(3)T2.5 rubber single-sided synchronous belt breaking strength: >=46n/mm(262.7lbf/in)
(4)T2.5 rubber single-sided tooth synchronous belt operating temperature range: -40 degrees – 120 degrees
T2.5 Rubber single-sided synchronous belt tooth spacing:
6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 32 mm, 50 mm
The width of the T2.5 rubber single-sided synchronization belt can be determined according to customer requirements.
T2.5 rubber single-sided synchronous belt design features and advantages:
The T2.5 rubber single-sided tooth synchronous belt is flexibly connected to the motor and motor, and has the following function points during operation:
1, T2.5 rubber single-sided tooth synchronous belt stable operation, avoid vibration belt slip.
2, T2.5 rubber single-sided tooth synchronization with high mechanical efficiency: effectively reduce friction and temperature, thereby increasing the use of the belt time.
3, T2.5 rubber single-sided tooth synchronous belt load capacity is strong
4, T2.5 rubber single-sided tooth synchronization belt without noise interference and does not require maintenance
5, T2.5 rubber single-sided tooth synchronous belt resistance to ozone and UV.
6, T2.5 rubber single-sided tooth synchronous belt has good oil resistance prediction, grease and gasoline.
7, T2.5 rubber single-sided tooth synchronous belt according to special conditions, acid resistance and cleaning supplies.
T2.5 Rubber single-sided synchronous belt Identification:
Three parts: Indicates the length, spacing, and width of the belt brought back by the part number. As shown in the following picture. This T2.5 rubber single-sided tooth synchronous belt model has a length of 160mm and a bandwidth of 6mm.
| Specification | Pitch length | Number of teeth |
| T2.5×145 | 145.00 | 58 |
| T2.5×160 | 160.00 | 64 |
| T2.5×172.5 | 172.50 | 69 |
| T2.5×200 | 200.00 | 80 |
| T2.5×230 | 230.00 | 92 |
| T2.5×245 | 245.00 | 98 |
| T2.5×265 | 265.00 | 106 |
| T2.5×272.5 | 272.50 | 109 |
| T2.5×275 | 275.00 | 110 |
| T2.5×285 | 285.00 | 114 |
| T2.5×300 | 300.00 | 120 |
| T2.5×305 | 305.00 | 122 |
| T2.5×330 | 330.00 | 132 |
| T2.5×335 | 335.00 | 134 |
| T2.5×355 | 355.00 | 142 |
| T2.5×380 | 380.00 | 152 |
| T2.5×420 | 420.00 | 168 |
| T2.5×480 | 480.00 | 192 |
| T2.5×500 | 500.00 | 200 |
| T2.5×512.5 | 512.50 | 205 |
| T2.5×580 | 580.00 | 232 |
| T2.5×620 | 620.00 | 248 |
| T2.5×625 | 625.00 | 250 |
| T2.5×690 | 690.00 | 276 |
| T2.5×780 | 780.00 | 312 |
No.12, Prosperity Road, Tianyang Village, Longshan Town, Cixi City
0574-63737656
0574-63737133
Cellphone：13221996622
Contact: Mr. Lin