L Rubber single tooth synchronous belt

Introduction to L Rubber single tooth synchronous belt

L Rubber single-sided synchronous belt design parameters:
The shape of the teeth is British trapezoid teeth, also known as square teeth, which belongs to the lightweight transmission design.
Standard design reference value: Pitch :9.525mm; Tooth height: 1.91mm; Belt thickness: 3.6mm; Angle: 40 degrees
L Rubber single-sided synchronous belt design points:
1, L rubber single-sided synchronous belt for trapezoidal teeth form.
2, L rubber single-sided tooth synchronous belt elastic support and belt teeth combined with durability and light weight.
3, L rubber single-sided tooth synchronous belt with teeth surface nylon 66 high tensile cloth face to protect and strengthen the tooth surface.
4, L rubber single-sided synchronous belt skeleton material using imported high-quality glass fiber rope has very good stability and flexibility.
L Rubber single-sided synchronous belt functional advantages:
1, power transmission up to 150 kW and speeds up to 10,000 rpm.
2, peripheral speed up to 80 m/s.
3, anti-synchronous belt slip.
4, L rubber single-sided tooth synchronous belt constant smooth operation.
5, high efficiency.
5, low bearing load, because L rubber single-sided tooth synchronous belt has a high tension of freedom.
6. Maintenance free continuous operation.
7, a wide range of load capacity and speed ratio.
8. Compact design.
L Rubber single-sided synchronous belt identification:
Three parts: Indicates the length, spacing, and width of the belt brought back by the part number. As shown in the following picture. This L rubber single-toothed synchronous belt model has a 60 inch (1524.00mm) pitch length and a 1 inch (25.4mm) bandwidth.

Specifications of L Rubber single tooth synchronous belt